EIB28 injection blow moulding machine

1.Festo,Yuken parts 2.3ml-800ml 3.pharma, food,cosmetic bottle 4.50000pc/day injection blow moulding machine

 EIB28 injection blow moulding machine

1.Machine features:

1).The clamping framework adopts single-crossbeam, double pillars, which enlarges the space of setting mould, will be easier to install mould.

2).Adoption of tie-bar protection makes open / clamping mould work while transfer table rise / fall, so the production efficiency improve obviously.

3).Available variable pump get further power consumption saving in system.

4).Injection clamping adopts the structure of three oil vats and small supply-oil case, hence the speed of open / clamping will be quicker and the bearing pressure of mould will be more equally.

5).Adopt six-pole motor, lower noise, lower energy consumption.

6).Special thickness of working platform is made of QT material, excellent mechanics function, difficult to transform.

2. Product Features

1).Excellent mechanical strength, impact resisting and non-cracking.

2). Bottle mouth and thread are of precise measurement, enabling100% close match with the bottle cap.

3).The weight of the product can be pre-set.

4).The measurement and thickness of the product can meet the requirement of the design without any deviation.

5).The surface of the bottle mouth and the body is bright and smoothness.

6).No deflashing and trimming, save the material.

7).There is no joint seam at the bottom, and the bottle strength is improved accordingly.

8).The joint seam on the bottle body is smooth

3.Main Technical Parameters

No.	item	Data	No.	item	Data
1	Dia. Of Screw	40mm	9	Max Mould size L *W	350*200mm
2	Length / dia. of Screw	32/1	10	Thickness of Mould	180mm
3	Max .theoretical firing rate	9.5g/sec	11	High of platform raise	60mm
4	Force of screw	58.8kg.m	12	Main power	11 kw
5	Clamp force 0f injection die	280 KN	13	Total power	20 kw
6	Clamp force 0f blow die	50 KN	14	Cooling  capacity	3m3/h
7	Distance of open mould	120 mm	15	Air Capacity	0.3 m3/h
8	Cycle without material	3 S	16	Overall size L* W* H	3400*1150*2300mm

Cavity Number of One Mould And Volume of Bottle.(For Reference)

Product volume(ml)	8	15	20	40	60	80	100
Cavity quantity	6	6	6	5	4	3	3

The special features

Adopt screw added more longer, Plastic melt rather better, Suitable for most thermoplastic resins such as PE, PP, PS,PC and so on.

Close mould part adopts single-crossbeam, so it has much bigger space to place moulds and change mould quickly.

Adopt safeguard of double lever. Up-down of turning platform and open-close of mould is almost take place at same time. One cycle time of one mold is shortening to about 8 seconds.

The machine fits common moulds of 25/30 ton, Cavity number of mould may be added according to bottle shape and customer demand.

EIB28 injection blow moulding machine