IB28 injection blow moulding machine

1.suitable for food,cosmetic,pharmaceutic bottle 2.material: PP,PE,PS etc injection blow moulding machine

IB28injection blow moulding machine

1. The Injection blow moulding machine features:

1).The clamping framework adopts single-crossbeam, double pillars, which enlarges the space of setting mould, will be easier to install mould.

2).Adoption of tie-bar protection makes open / clamping mould work while transfer table rise / fall, so the production efficiency improve obviously.

3).Available variable pump get further power consumption saving in system.

4).Injection clamping adopts the structure of three oil vats and small supply-oil case, hence the speed of open / clamping will be quicker and the bearing pressure of mould will be more equally.

5).Adopt six-pole motor, lower noise, lower energy consumption.

6).Special thickness of working platform is made of QT material, excellent mechanics function, difficult to transform.

2.Product Features

1).Excellent mechanical strength, impact resisting and non-cracking.

2). Bottle mouth and thread are of precise measurement, enabling100% close match with the bottle cap.

3).The weight of the product can be pre-set.

4).The measurement and thickness of the product can meet the requirement of the design without any deviation.

5).The surface of the bottle mouth and the body is bright and smoothness.

6).No deflashing and trimming, save the material.

7).There is no joint seam at the bottom, and the bottle strength is improved accordingly.

8).The joint seam on the bottle body is smooth.

MAIN TECHNICALPARAMETERS

No	Item	Data	No.	Item	Date	No	Item	Data
1	Dia. Of Screw	40mm	8	Idle time	3.5S	15	Wastage of cooling	3m 3 /h
2	Max. theoretical capacity	165cm 3	9	Max Mould size L *W	350*250 mm	16	Overall size L* W* H	3150*1150*2150 mm
3	Heating power of cylinder	6.5kw	10	Min. mould thickness	180mm	17	Machine weight	4T
4	Heating control section	3 qty	11	Main power	11kw	18	Range of formability product	5-800 ml
5	clamping force 0f injection die	280KN	12	Pressure of hydraulic	14Mpa	19	High of formability product	200 mm
6	Clamping force 0f blow die	50KN	13	Pressure of comp air	1.0 Mpa	20	Dia. of formability product	100 mm
7	Opening distance of mould	120	14	Wastage of comp air	0.3 m 3 /h	21	Total power	20.7kw

Cavity number of one mould corresponding to product volume.(For reference)

Diameter(D)(mm)	25	30	43	48	65	80
Height(H)(mm)	60	80	80	100	120	150
Central distance(mm)	35	40	55	60	80	100
Number	7	6	5	4	3	2

IB28 injection blow moulding machine